product

Professional China Antistatic Finishing Of Fabric - Levelling agent for acid and pre-metallized dyes – Honneur

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

we can offer high quality products, competitive price and best customer service. Our destination is You come here with difficulty and we give you a smile to take away for Viscosity Formula Fluid, Silicone Tire, Silicone Sealant Spreader, Welcomes all overseas friends and merchants to establish collaboration with us. We will provide you with honest, high quality and efficient service to meet your requirements.
Professional China Antistatic Finishing Of Fabric - Levelling agent for acid and pre-metallized dyes – Honneur Detail:

Levelling agent for acid and pre-metallized dyes
Use: Levelling agent for acid and pre-metallized dyes.
Appearance: Amber clear liquid.
Ionicity: Anion / non-ionic
PH Value: 7~8 (10 g/l solution)
Appearance of aqueous solution: Clear
Hard water stability: Excellent, even at 20° dH hard water.
pH stability: PH 3-11 stable
Electrolyte stability: Sodium sulfate or sodium chloride up to 15g/l.
Compatibility: Compatible with anionic dyes and auxiliaries, and incompatible with cationic dyes.
Storage stability: Store at room temperature for 12months. It may crystallize at temperatures
below 5℃, but does not affect product performance

Characteristic
LEVELING AGENT 01 is an anionic / non-ionic levelling agent, it had affinity with both
cashmere and wool fiber (PAM) and dyes. therefore, it has good retarding dyeing, excellent
penetration and even dyeing properties. It has a good adjusting effect on synchronizing dyeing and
exhaustion regulation for trichromatic combination dyeing and Easily-unevenly dyed fabrics
LEVELING AGENT 01 AGENT 01 has a good effect on the improvement of uneven color or too
deep dyeing and has good discharge performance.

Dosage:
 Dyeing
The dosage of LEVELING AGENT 01 should be strictly according to the dosage of dyes,
usually 0.5%-2.5%. For fabrics with poor dyeing uniformity, the dosage can be increased.
LEVELING AGENT 01 should have been added to the dye bath to adjust the pH before adding
the dyes and salts
for polyamide fiber dyeing which is easily unevenly dyed, pls add LEVELING AGENT 01 and
gradually heat it to 95-98°c or even 110-115°c before adding dyes. The cycle preheating treatment
is 10-20min, then add cold water to cool it to 40-50 ° c, then add dyes, adjust pH, and start dyeing.
 Color Repairing
Use 1%-3% LEVELING AGENT 01 and heat it to boil in an ammonia bath (2-4%), which can
repair uneven dyeing or too deep dyeing.


Product detail pictures:

Professional China Antistatic Finishing Of Fabric - Levelling agent for acid and pre-metallized dyes – Honneur detail pictures


Related Product Guide:

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for Professional China Antistatic Finishing Of Fabric - Levelling agent for acid and pre-metallized dyes – Honneur , The product will supply to all over the world, such as: Romania, Armenia, Slovak Republic, Selling our products causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.
  • It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Alice from Montreal - 2018.09.19 18:37
    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Andrew from Barcelona - 2018.07.26 16:51
    Write your message here and send it to us