Wholesale SILIT-PUR 5998N (Finishing Agent) Factory and Pricelist

SILIT-PUR 5998N (Finishing Agent)

Short Description:

The wet rubbing fastness enhancing agent has a good effect on the wet rubbing fastness of reactive, direct, sulfurized, and indigo dyed fabrics, which can be improved by 1-2 levels.
It also has a significant improvement effect on high count, high-density, and ground woven fabrics.

SILIT-PUR5998N WETTING RUBBING FASTNESS IMPROVER: SILIT-PUR5998N is a deep improvement product, especially for treated fabrics that are difficult to improve their wet rubbing fastness. Its working fluid has good stability and high sustainability. It can solve the problem of oil slick and oil spots in the use of the same type of products. The improvement effect of wet rubbing fastness is obvious, and it can be increased to more than 3 levels.

Send email to us Tds Of The Product

Product Detail

FAQ

Product Tags

Introduction

SILIT-PUR 5998N (WASHING PREPARATION) is a high-performance boosting agent, specially designed for fabrics with poor wet rubbing fastness that are hard to upgrade. Its working bath features excellent stability and good durability. It avoids oil film and oil spots commonly caused by similar products. It delivers outstanding wet rubbing fastness improvement, with a grade upgrade of over 3 levels.

Properties

- Appearance: Light yellow liquid

- pH value: 3.0-5.0

- Ionicity: Non-ionic

- Solubility: Water-soluble

- Composition: Polymers

Characteristics

1. Polymer compound, formaldehyde-free. Suitable for fixation finishing of reactive, sulfur, direct and vat dyed fabrics.

2. Good penetration and adsorption performance.

3. It can form a lake with dyes inside fibers to strengthen the binding force of dyes on fibers.

4. Co-bathing with amino silicone softener will impair its performance.

5. It has negligible impact on hand feel and slight color change. It can greatly improve dry and wet color fastness; the wet rubbing fastness of dark fabrics can be improved by 1–2 grades.

Reference Process

1. Impregnation Method

Dosage: Wet & Dry Fastness Enhancer: X% o.w.f. (adjust according to shade); Bath ratio: 1:10~20

Process: Dyed fabric (pH 7) → impregnation (30 ℃, 20~30 min) → drying (low temperature: 60–80 ℃; high temperature: 100~105 ℃)

2. Pad-dry Method

Dosage: Wet & Dry Fastness Enhancer: X g/L

Process: Dyed fabric (pH 7) → two dips two nips (10~30 ℃, pick-up: 70~80%) → drying (100~105 ℃)

Notes

1. This product shall not be heated. Soft water is recommended for preparation. The freshly prepared working solution is a translucent emulsion at approx. 25 ℃ and shall be used promptly.

2. Apply at low temperature; do not heat the working bath.

3. For use in dyeing vessels, add the product first and keep the working liquor well circulated.

4. When applied before stenter, pre-dilute the product in the high-level tank under continuous stirring. An air bubbling system on the feed tank is recommended to avoid settling of the fixing agent during operation. Cool the solution prior to feeding to the stenter.

Package

Packed in 125 kg plastic drums.