product

Levelling agent for acid and pre-metallized dyes

Short Description:

Characteristic
Levelling agent for acid and pre-metallized dyes is an anionic / non-ionic levelling agent, it had affinity with both
cashmere and wool fiber (PAM) and dyes. therefore, it has good retarding dyeing, excellent
penetration and even dyeing properties. It has a good adjusting effect on synchronizing dyeing and
exhaustion regulation for trichromatic combination dyeing and Easily-unevenly dyed fabrics
Levelling agent for acid and pre-metallized dyes has a good effect on the improvement of uneven color or too
deep dyeing and has good discharge performance.


Product Detail

FAQ

Product Tags

Levelling agent for acid and pre-metallized dyes
Use: Levelling agent for acid and pre-metallized dyes.
Appearance: Amber clear liquid.
Ionicity: Anion / non-ionic
PH Value: 7~8 (10 g/l solution)
Appearance of aqueous solution: Clear
Hard water stability: Excellent, even at 20° dH hard water.
pH stability: PH 3-11 stable
Electrolyte stability: Sodium sulfate or sodium chloride up to 15g/l.
Compatibility: Compatible with anionic dyes and auxiliaries, and incompatible with cationic dyes.
Storage stability: Store at room temperature for 12months. It may crystallize at temperatures
below 5℃, but does not affect product performance

Characteristic
LEVELING AGENT 01 is an anionic / non-ionic levelling agent, it had affinity with both
cashmere and wool fiber (PAM) and dyes. therefore, it has good retarding dyeing, excellent
penetration and even dyeing properties. It has a good adjusting effect on synchronizing dyeing and
exhaustion regulation for trichromatic combination dyeing and Easily-unevenly dyed fabrics
LEVELING AGENT 01 AGENT 01 has a good effect on the improvement of uneven color or too
deep dyeing and has good discharge performance.

Dosage:
 Dyeing
The dosage of LEVELING AGENT 01 should be strictly according to the dosage of dyes,
usually 0.5%-2.5%. For fabrics with poor dyeing uniformity, the dosage can be increased.
LEVELING AGENT 01 should have been added to the dye bath to adjust the pH before adding
the dyes and salts
for polyamide fiber dyeing which is easily unevenly dyed, pls add LEVELING AGENT 01 and
gradually heat it to 95-98°c or even 110-115°c before adding dyes. The cycle preheating treatment
is 10-20min, then add cold water to cool it to 40-50 ° c, then add dyes, adjust pH, and start dyeing.
 Color Repairing
Use 1%-3% LEVELING AGENT 01 and heat it to boil in an ammonia bath (2-4%), which can
repair uneven dyeing or too deep dyeing.


  • Previous:
  • Next:

  • Write your message here and send it to us